LINUX NIC Bonding
From ScotGrid
On the Extreme Switches X460 run the following commands to bond Sandybridge Workernodes.
- Slot-2 141access.management.cluster.8 # enable sharing 8:43 grouping 8:43,8:44 algorithm address-based L3_L4 lacp
Warning: Any config on the master port is lost (STP, IGMP Filter, IGMP Static Group, MAC-Security, etc. etc.)
- Slot-2 141access.management.cluster.9 # show sharing
Load Sharing Monitor Config Current Agg Ld Share Ld Share Agg Link Link Up Master Master Control Algorithm Group Mbr State Transitions
[edit]
==================================================================
1:53 1:53 Static L3 1:53 Y A 3
L3 1:54 Y A 3
L3 2:53 Y A 4
L3 2:54 Y A 4
L3 7:53 Y A 3
L3 7:54 Y A 3
L3 8:53 Y A 3
L3 8:54 Y A 3
2:23 LACP L2 2:23 - R 0
L2 2:24 - R 0
2:25 LACP L2 2:25 - R 0
L2 2:26 - R 0
2:27 LACP L2 2:27 - R 0
L2 2:28 - R 0
3:23 LACP L2 3:23 - R 0
L2 3:24 - R 0
3:25 LACP L2 3:25 - R 0
L2 3:26 - R 0
5:19 LACP L2 5:19 - A 1
L2 5:20 - A 1
5:21 5:21 LACP L2 5:21 Y A 4
L2 5:22 - R 0
5:27 LACP L2 5:27 - R 0
L2 5:28 - R 0
6:17 LACP L2 6:17 - R 3
L2 6:18 - R 3
6:19 LACP L2 6:19 - R 2
L2 6:20 - R 2
6:21 LACP L2 6:21 - R 2
L2 6:22 - R 2
6:23 LACP L2 6:23 - R 0
L2 6:24 - R 0
6:25 LACP L2 6:25 - R 1
L2 6:26 - R 1
7:17 7:17 LACP L2 7:17 Y A 45
L2 7:18 Y A 33
7:21 7:22 LACP L2 7:21 - A 2
L2 7:22 Y A 3
8:21 8:21 LACP L2 8:21 Y A 1
L2 8:22 Y A 1
8:43 8:43 LACP L3_L4 8:43 Y A 88
L3_L4 8:44 Y A 42
[edit]
==================================================================
Link State: A-Active, D-Disabled, R-Ready, NP-Port not present, L-Loopback Load Sharing Algorithm: (L2) Layer 2 address based, (L3) Layer 3 address based
(L3_L4) Layer 3 address and Layer 4 port based
(custom) User-selected address-based configuration
Custom Algorithm Configuration: ipv4 L3-and-L4, xor Note - Layer 4 ports are not used for distribution for traffic ingressing
ports on X450-24t and X450-24x switches.
Number of load sharing trunks: 18
- Slot-2 141access.management.cluster.10 # configure sharing 8:43 lacp activity-mode passive
<cr> Execute the command
